adhesive strength
英 [ədˈhiːsɪv streŋθ]
美 [ədˈhiːsɪv streŋθ]
胶粘（附着）强度；粘着力
双语例句
- The adhesive strength is strong, dry quick;
附着力强，干燥迅速； - Stable adhesive strength can be obtained with a variety of SMD.
对于各种表面粘着零件，可获得安定的接着强度。 - The adhesive strength of the films to the substrates, diamond-coated tool wear and surface roughness of the workpiece were further studied by turning glass fiber reinforced plastic cylindrical bars.
通过玻璃纤维增强塑料的车削试验，研究了薄膜与基体之间的附着强度、涂层刀具的磨损和加工工件的表面粗糙度。 - Two factors remarkable analysis can measure to assess the interface adhesive strength testing affection.
双因素显著性分析可对界面扯离力的测试影晌进行量化评估。 - Method of test for adhesive strength of sizes
GB/T1742-1979胶液粘合强度测定法 - Method of test for adhesive strength of sizes Design of On-Line Measurement and Controlment for Viscosity of Polymer Liquid
GB/T1742-1979胶液粘合强度测定法注聚液在线粘度检测与控制系统设计 - General-purpose, use with hardener to, enhance the adhesive strength of PU.
通用性油皮处理剂，使用时需添加相应的硬化剂，增强PU的粘接力。 - The adhesive strength of the acid film was stronger than that of the alkali film.
碱性镀层的结合强度优越于酸性镀层。 - It is obtained from test that the Rare-earth additives can improve the adhesive strength, decrease porosity, make porousness smaller, therefor, raise the properties of the arc spraying coatings.
结果表明稀土的加入提高了涂层的结合强度，使孔隙变小、数量减少，明显改善涂层性能。 - The effect of micro-arc voltage on the microstructure and adhesive strength of the films was studied, and the bioactivity of the films was also evaluated.
研究了电压对膜微观结构和结合强度的影响，并评价了微弧氧化钛膜的生物活性。 - Minimum adhesive strength build up ensures easy peeling without adhesive migration and delamination.
低逐加粘合度可确保易于剥离而不会产生溢胶和分离。 - With increasing the heat-treatment temperature, the adhesive strength and corrosion resistance of the films declined.
热处理温度进一步增加，镀层的结合强度下降，耐蚀性变化不大。 - Experimental study of adhesive strength between fibre posts and composite resin cores after surface treatment
6种表面处理法对纤维桩树脂核黏结力影响的实验研究 - The Research of Horizontal Analysis on Exterior Insulation and Finish with Polymer Mortar Adhesive Strength Testing Method
外墙外保温用聚合物砂浆粘接强度检验方法的分析研究 - In it's raw state, LS has very little adhesive strength. Among the properties which do not show a leveling-off are the viscosities of solutions and melts.
在它的原始状态，液体软陶有一定的粘结强度。溶液和熔体的粘度等性能曲线并不呈现平坦。 - Comparative study on adhesive strength of three colloid materials and their complexes as bone adhesives
三种胶体材料及其复合物作为骨粘合剂的粘合强度比较 - A novel two-component epoxy adhesive with high adhesive strength was developed to meet the bonding requirement of mounting plate of crane rail and steel beam in the workshop.
根据车间内钢梁上吊车轨道安装底板与钢梁粘接的具体要求，研制了一种中温固化双组分环氧胶粘剂。 - The result shows that several factors have great influence on adhesive strength, and these factors include dosage of polymer, properties of XPS board, different interface treatment agent and so on.
对影响砂浆与XPS板黏结强度的影响因素进行了探索研究，结果表明，聚合物的掺量、不同XPS板、不同类型界面剂对砂浆与XPS板的黏结强度都有较大影响。 - In order that thermal sprayed coats are made to have higher adhesive strength, commonly a thin layer of bonding is precoated, then the functional layer is sprayed again.
为了使热喷涂层有高的结合强度，一般要在基体上先喷一薄的底层，然后再喷工作层。 - Factors of Effect on Adhesive Strength of Graft Neoprene Adhesive
氯丁接枝胶粘剂粘合剥离力的影响因素 - Influence of emulsion agent in acrylate emulsion size on sizing adhesive strength of roving yarn
丙烯酸浆料中乳化剂对粗纱黏附力的影响 - Research on adhesive strength of different composites resin core and fiber posts
不同树脂核材料与纤维桩抗拉强度的实验研究 - The relationship between Brookfield viscosity and temperature, dip pick-up and adhesive strength of dip solution for PA6 tire cord was discussed.
讨论了锦纶6帘子布浸胶液布氏粘度与温度、附胶量、粘着强度的关系。聚酰胺纤维锦纶（PA）用N表示。又叫耐纶，尼龙。 - Adhesive strength, hardness and the thermal shock resistance of spraying coating were tested.
测试了喷涂层的结合强度、硬度以及抗热震性能。 - The adhesive strength and strength of resistance to impacting for the metal manufacture is better than normal epoxy.
对金属物品之接著，耐冲击强度优于环氧树脂。 - The results showed that the incorporation of acrylonitrile-modified cure agents can improved the adhesive strength between epoxy resin and ABS plastic.
经迈克尔加成反应，用丙烯腈制作了一系列改性多元胺固化剂，将其与双酚A型环氧树脂配合，用于粘接ABS塑料。 - This paper described the uncertainty evaluation of measurement results for adhesive strength of tapestry brick of construction engineering according to the national measuring technique standard.
依据中华人民共和国国家计量技术规范对建筑工程饰面砖粘结强度测试中有关测量不确定度的评定进行了论述。 - Study of Factors Influencing Adhesive Strength of AlSn20Cu/ Steel Bimetal
影响20高锡/钢双金属材料粘结强度因素探讨 - Influence of heat treatment on Microstructures and adhesive strength of high temperature solid self-lubricant coating
热处理对高温固体自润滑涂层组织结构及结合强度的影响 - High adhesive strength with good bubble-dissipation capability, good stress relaxation and gap absorption capability ( as Fig.1).
高黏着性。在贴合时，有优良的气泡消散性、应力缓和性，被着面的段差吸收性。